•   0091-22-66157017
  •   info@torqbolt.com
  • Home

    Zeron 100 SA Hex Bolts, Solution-Annealed UNS S32760 Super Duplex Hex Bolts (ASTM A479 + ASME B18.2.1)

    Zeron 100 super duplex hex bolts (UNS S32760, ASTM A479) sizes 1/4-4 inch and M6-M100

    Zeron 100 SA hex bolts are super duplex stainless steel hex-head bolts (UNS S32760 / Werkstoff 1.4501) supplied in the Solution Annealed standard supply state, the metallurgical baseline for super duplex. The 1100-1140°C anneal + water-quench cycle dissolves any sigma-phase / chi-phase that formed during prior hot-work, locks in the equilibrium 50/50 austenite-ferrite microstructure, and delivers the canonical PREN ≥ 40 + CPT ≥ 50°C corrosion envelope. SA is the right pick when buyer spec doesn't reference A193 B7-equivalent yield, for the higher-strength variant see Zeron 100 FG hex bolts.

    SA = Solution Annealed (1100-1140°C water quench) · Yield 620-720 MPa · Hardness 22-27 HRC · PREN ≥ 40

    Use SA hex bolts on equipment frame fasteners, valve cover bolting, pump bonnet closure, structural connections, and any moderate-load fastener in seawater / sour / chloride service. SA is also the only metallurgically correct call when the bolt will be welded post-install (welding restores SA at the HAZ regardless, starting SA saves the FG cost premium).

    Mechanical Envelope, SA Hex Bolts (per heat MTC)

    PropertyTypicalMinimum (acceptance)
    0.2% Yield620-720 MPa550 MPa
    UTS800-870 MPa750 MPa
    Elongation30-38 %25 %
    Hardness body22-27 HRC200 HBW
    Hardness rolled root25-28 HRC≤ 28 HRC (NACE)
    Charpy V-notch -46°C60-110 J45 J avg / 35 J min
    Ferrite40-52 %35-55 %
    CPT (G48 Method E)≥ 50°C50°C

    Standards & Compliance

    ASTM A479 + ASTM A1082 + ASME B18.2.1 + ASME B1.1 (thread tolerance class 2A) + NACE MR0175 / ISO 15156-3 (sour-service ≤ 28 HRC) + NORSOK M-650 + M-630 MDS 055 (North Sea super duplex) + EN 10269 (European pressure equipment).

    Cross-References

    For full SA supply state details see the Zeron 100 SA cornerstone page. For the hex-bolt variant in all supply states see Zeron 100 Hex Bolts. Sister supply states for the same hex-bolt variant: FG (cold-worked, A193 B7 yield), FLT (low-temp Charpy, ASTM A320 L7).

    Request a Quote

    Send the spec (size + length + thread + quantity + destination port) to info@torqbolt.com or +91-22-66157017 / WhatsApp.

    Specifications
    Certifications
    • ISO 9001 - 2015 Certified
    • PED 2014/68/EC
    • NACE MR0175/ISO 15156-2
    • NORSOK M-650 MDS 055
    • DFAR
    • MERKBLATT AD 2000 W2/W7/W10
    Rajkot Plant