Home

Zeron 100 SA Hex Nuts, Solution-Annealed UNS S32760 Super Duplex (ASME B18.2.2 Standard Hex Pattern)

Zeron 100 super duplex hex nuts, finished hex nuts per ASME B18.2.2

Zeron 100 SA hex nuts are super duplex stainless steel finished hex nuts (UNS S32760 / Werkstoff 1.4501) per ASME B18.2.2 standard hex pattern (inch) or ISO 4032 (metric), the lighter pattern vs heavy hex. Hot-forged from solution-annealed bar then SA + tapped to class 2B / 6H. Used for general bolting + tie-rod end termination + low-to-moderate load joints. For ANSI flange stud-bolt companions or NORSOK / API high-load joints, specify heavy hex nuts instead, standard hex doesn't have enough thread engagement for full A1082 stud yield.

Standard hex pattern · Hot-forged + SA + tapped · Hardness ≤ 28 HRC NACE · PREN ≥ 40

SA Properties + Standards

Yield 620-720 MPa / UTS 800-870 MPa / Hardness body 22-27 HRC, tapped root ≤ 28 HRC NACE / Charpy ≥ 60 J at -46°C / Ferrite 40-52% / CPT ≥ 50°C. Standards: ASME B18.2.2 + ISO 4032 + ASTM A1082 + ASTM F606 + NACE MR0175 + NORSOK M-630 MDS 055.

Cross-References

SA cornerstone · All hex nut supply states · Heavier pattern: SA heavy hex nuts.

Request a Quote

Send the spec to info@torqbolt.com / +91-22-66157017 / WhatsApp.

Specifications

ASTM A182 F55
ASTM A240
ASTM A276
ASTM A473
ASTM A479
ASTM A574
ASTM A790
ASTM A815
ASTM A314

Surface Treatments

Certifications

ISO 9001 - 2015 Certified
PED 2014/68/EC
NACE MR0175/ISO 15156-2
NORSOK M-650 MDS 055
DFAR
MERKBLATT AD 2000 W2/W7/W10

About Us

Rajkot Plant

TorqBolt Production Facility
Rajkot, Gujarat, India
info@torqbolt.com
+91-22-66157017
WhatsApp

Zeron® 100 is a registered trademark of RA Materials.

Questions? Contact us.

Showcase of our

Satisfaction Survey